Can You Replace Semi Truck Steer Tire Valve Stem While on Truck
How to Replace Tubeless Tire Valve Stems
by Skip Shelton
valve paradigm by RomainQuéré from Fotolia.com
Tire valves are seated in a wheel rim, and they allow tubeless tires to exist pressurized with air. The valve forms a tight seal with the rim to ensure no air loss occurs while driving the vehicle. Valve stems should be inspected periodically for groovy, leaking or deterioration, and they should be replaced equally needed. Gradual air loss through a failed valve stalk may be the reason a tire appears to take a hole but no damage tin exist found. Valve stems should be replaced whenever you become new tires to help ensure long tire life.
Step 1
Place whether or not the valve stem to be replaced has a tire pressure level monitoring sensor (TPMS). This sensor electronically communicates tire pressure levels to the vehicle'southward computer to allow monitoring of abnormal or unsafe pressure level. Removal of a TPMS-enabled valve stem requires that the tire be removed and that the TPMS be removed from the valve stem prior to valve stem removal, or damage to the TPMS will occur.
Step 2
Identify whether the valve stem to be replaced is a loftier-force per unit area stem. Passenger vehicle valve stems typically have a rating of 65 psi. If pressure level is expected to exceed this under load, high-pressure valve stems should be used.
Stride 3
Deflate the tire. Push the tire seat away from the rim to allow access to the underside of the wheel rim where the valve stem is placed.
Step 4
Lubricate the valve stem prior to insertion. A small amount of liquid dish soap may be used.
Footstep 5
Push button the valve stem through the rim. Remove the valve stem from the cycle. If your valve stem is on an blend wheel, the valve stalk may be a clamp-on style with a nut. Thread and tighten the nut to ensure a snug fit.
Stride 6
Insert the new valve stem from inside the rim and pull through until the rubber grommet is seated. A properly seated valve stalk will allow the gap between the front and rear of the valve stalk to be filled by the rim. This will class a tight seal under force per unit area of the air contained in the tire. Make sure that the valve stem is aligned evenly to permit a tight fit nether force per unit area.
Seat the tire and inflate. Check the valve stem cadre and the valve stem for leaks prior to driving.
References
Tips
- Make sure that the replacement valve stem is correct for the tire and wheel. Car parts stores will identify whether or not the valve stem style is correct for the electric current awarding.
Things You'll Need
- Pliers
- Crescent wrench
- Liquid dish soap
Warnings
- If lubrication is required to properly seat a valve stem, do not utilize an oil-based lubricant, equally the rubber of the valve stem will blot the oil and may crusade premature deterioration.
Author Bio
Skip Shelton has been writing since 2001, having authored and co-authored numerous articles for "Disembalm Periodical." He holds a Bachelor in Scientific discipline in instruction and a Principal of Business concern Administration with an emphasis in direction from Northwest Nazarene University. Shelton also operates a small automotive maintenance and part-replacement shop.
More Manufactures
Source: https://itstillruns.com/replace-tubeless-tire-valve-stems-6895014.html
0 Response to "Can You Replace Semi Truck Steer Tire Valve Stem While on Truck"
Post a Comment